We are operating at reduced capacity due to COVID-19 Alert Level Two restrictions. Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
Energy Safety technical officers visited the property to examine the fire and its installation.
Energy Safety dismantled the fire and found that one of the decorative shale pieces had dislodged and fallen into the pilot assembly. This had blocked the main burners and prevented correct cross lighting. The tray that holds the shale and logs was not screwed into the frame of the fire as per the manufacturer’s specifications. This allowed the tray to sit proud of the pilot assembly and left a small gap for the shale to slip into. Energy Safety was not able to establish who was responsible for the tray not being secured into position.
It is Energy Safety's opinion that the dislodged shale caused the main burners not to light correctly and allowed gas to build up in the combustion chamber until the gas found an ignition source and ignited explosively.
The manufacturer has indicated they will be retrofitting a new pilot hood to minimise the risk of poor ignition in this model of heater.