We are operating at reduced capacity due to COVID-19 Alert Level Two restrictions. Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
Court Summary - at a glance
- Identify the site specific risk related to the switchboard upgrade project at Myers Reserve
- Complete an assessment of the risks related to working near energised conductors and implemented appropriate controls
- Provide, maintain, implement and monitor a safe system of work
- Ensure the switchboard was isolated/de-energised prior to the work commencing
- Ensure a safe work procedure included a requirement to use insulating matting to cover any live components if not reasonably practicable to de-energise.
The electricity was turned off at the main switch but electricity was not isolated to the incoming side of the main switch. The only way to do this was by isolate the electrical supply to the transformer outside of the building. This required high voltage fuses to be opened on the power pole.
The victim was a very experienced and trusted employee, and had a less experienced co-worker with him on the day. The victim was drilling into bus bars and an arc flash occurred. This was most likely caused by copper swarf contacting the main switch.
The victim sustained first degree burns to his face, including singeing of his beared, eyelashes and eyebrows, and second degree burns to his hands and fingers. The co-worker was unharmed.