We are operating at reduced capacity due to COVID-19 Alert Level Two restrictions. Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
Court Summary - at a glance
- Ensure the conveyor was fitted with appropriate guarding/barriers; and
- Ensure appropriately located emergency stops are installed on the conveyor
On the day of the incident, the victim, an employee of the Defendant, was tasked with loading concrete debris onto a conveyor. The conveyor was driven by a single powered pulley at the head drum and delivers material into a crusher. The victim attempted to free a piece of concrete that had become stuck in the conveyor belt. The victim stopped the belt through the use of a remote control which was designed for use from the front-end loader as opposed to using the cut-off switch which was the instructed practice.
While attempting to push the obstruction clear the victim started the conveyor again so as to advance it slightly. As they did so their left glove became caught and the victim was dragged around the outside of the drum. The victim repeatedly attempted to stop the conveyor using the remote control but the conveyor would not deactivate. The victim eventually managed to pull their arm free.
The victim suffered a broken left arm as well as extensive soft tissue damage to their tendons and muscles.