We are operating at reduced capacity due to COVID-19 Alert Level Two restrictions. Please only call our 0800 number if someone is at serious risk of harm or has been seriously injured, become seriously ill, or died as a result of work.
For other notifications please complete our online forms at Notify WorkSafe.
There have been two recent near-miss incidents involving operations above historic underground workings. In both cases, underground voids were unexpectedly revealed when the surface caved into the void underneath working machinery.
An underground void was exposed on the surface of an active coal-crushing and screening plant when a frontend loader passed over the area. The ground collapsed under the rear right wheel. The operator immediately noticed the void and was able to drive out.
In an open cut operation, mining was actively progressing above a historic underground mine. Waste material was being top-loaded into dump trucks and when a dump truck moved out from the digger, the ground collapsed under the rear offside wheels. The truck was not able to drive out and needed to be towed out of the void.
These incidents show that it is important to:
- identify historic workings under the coal processing area as a hazard
- sufficiently verify historic underground plans for spatial accuracy, checking to ensure that the information is correct and stability hasn’t been further compromised
- identify weak rock above underground voids as they can collapse into the void
- be aware high ground water increases the propensity for caving (and reduced bulking of caved material).
Historic underground workings pose significant risks to mining operations. All mines should identify any historic underground workings within their operations and use the New Zealand mine plans website(external link) as part of any investigation.
Assess the risk in areas where historic underground workings have been identified to exist, and involve a geotechnical engineer in the risk assessment team.
- Include in your assessments:
- information on depth of workings from the surface
- potential size of underground voids
- what rock types exist below surface, and what caving/bulking characteristics they have
- potential for voids to contain water and/or dangerous gases.
Further guidance can be found in our Good Practice Guidelines on Health and Safety at Opencast Mines, Alluvial Mines and Quarries [PDF, 12 MB].
NZ Mine Plans
NZ Mine Plans is a purpose-built database with an interactive GIS webmap. It provides free access to a catalogue of plans for recent and historic mines in New Zealand.Read more
Health and safety at opencast mines, alluvial mines and quarries
From the top down, safety needs to be a priority at all mines – including opencast and alluvial mines and quarries. We have produced guidance to address the risks and hazards specific to this type of mining and extraction work.Read more